Eyelash Flexing Expert System ? SUPERSONIC 2.0 ? Serum 1 Pink

LASH FLEXING PROCEDURE STAGES

1) Diagnosing of the client’s lash hairs and determination of the exposure time of the flexing products according to the points listed below:

1-st group: the lash hairs are thick or straight — processing time is 6-10 minutes for Serum 1 and no less than 6 minutes for Serum 2;

2-nd group: the lash hairs are of the medium thickness or thin — processing time is 3-6 minutes for Serum 1 and no less than 6 minutes for Serum 2;

The processing time of Multivitor is 5 minutes for all hairs types.
NOTE! The maximum processing time of Serum 1 and Serum 2 is 15 minutes.

NOTE! The activity of Serum 1 and Serum 2 depends directly on the room air temperature. The higher the temperature, the less the reaction time.

2) Preparing the lashes for the flexing procedure

1. Use ÉLAN DETOX-MOUSSE to cleanse the hairs before the lash flexing procedure. Remove the foam with a cotton pad moistened with water.

2. Fix the silicone pad of the required size on the upper eyelid.

3. Spread and fix the lashes on the pad with TM ÉLAN professional line fixing gel and an applicator.

3) Creating the lash curl (Serum 1)

1. Apply Serum 1 to the area of the lash curve. The exposure time is 3-10 minutes.

NOTE! The maximum processing time should not exceed the processing time for the selected lash hairs type.

2. After the exposure time has expired, remove the excess of the solution with a dry brush in the direction of lash growth.

4) Fixing the lash hairs direction (Serum 2)

1. Apply Serum 2 to the entire lash area in a thick layer. The exposure time is 6-10 minutes.

NOTE! The processing time at the IV stage (Serum 2) should be equal to the processing time at the III stage of creating the lash curl (Serum 1), but no less than 6 minutes.

After the exposure time, remove the remnants of the product with a dry brush in the direction of lash growth.

5) Lash hairs care (Multivitor)

1. Apply Multivitor to the entire lash area. Exposure time: 5 minutes.

2. After exposure time, remove the remnants of the product and fixing gel with a cotton pad moistened with water.

NOTE! In order to achieve the most impressive effect and the visible result, ÉLAN professional line brand technologists recommend performing the lash tinting procedure, when the flexing procedure is finished.

LASH POST-PROCEDURE RECOMMENDATIONS

! It is highly recommended to avoid saunas, solariums and any mechanical damage of the lash curl (sleeping face down on the pillow), reduce the contact of the lashes with water as well as do not brush the lashes for 24 hours after the flexing procedure.
! It is highly recommended to avoid using the aggressive cosmetic products and undergoing the aggressive cosmetic procedures (scrubs, face peels, alcohol based lotions, laser treatments) for 48 hours after the lash flexing procedure.

RESTRICTIONS ON THE PROCEDURE OF LASH FLEXING

Absolute restrictions for the lash flexing procedure: individual sensitivity to the components in the products, any skin damage in the eye area, redness, rashes of any etiology, as well as visiting the solarium, laser and photo procedures 24 hours before the procedure.

PRECAUTIONS

Before use, perform an allergy test: apply 2 drops of each product to a small area of the skin of the elbow bend 48 hours before use. If there is no redness, swelling or irritation on the skin, you can start the flexing procedure.

Serum 1 contains thioglycolate. Serum 2 contains hydrogen peroxide. The products may cause an allergic reaction. Wear protective gloves. Do not use metal objects when handling the products. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. In case of an allergic reaction, consult a dermatologist.